Technical parameters:
| model & specification | CTMT-750 | CT3JZMT-750 | CTMT-300 |
| allowed wheel/axle load(kg) | 750 | 750 | 300 |
| axle distance applicable (mm) | 900—1700 | 900—1700 | 900—1700 |
| (mm)wheel distance applicable | 500(inner width)/1500(outer width) | 500(inner)/1500(outer) | 500(inner)/1500(outer) |
| (kw)motor power | 10 | 10 | 6 |
| air supply(Mpa) | air pressure 0.5-0.8 | air pressure 0.5-0.8 | air pressure 0.5-0.8 |
| Brake tester | (mm)roller dia. | 2-∮180×300 2-∮180×1000 | 2-∮180×300 2-∮180×1000 | ∮180×300 |
| roller central distance(mm) | 310 | 310 | 310 |
| (N)brake force testing range | 0-2500 | 0-2500 | 0-2000 |
| value error | ±3% | ±3% | ±3% |
| speed tester | (mm)roller dia. | 2-∮176.6×300 2-∮176.6×1000 | 2-∮176.6×300 2-∮176.6×1000 | ∮176.6×300 |
| roller central distance(mm) | 310 | 310 | 310 |
| (km/ h)testing range | 0-80 | 0-80 | 0-80 |
| value error | ±2% | ±2% | ±2% |
| axle load tester | (kg)testing range | 0-750 | 0-750 | 0-300 |
| value error | ±2% | ±2% | ±2% |
| wheel deviation tester | (mm) Testing range | ±15 | | ±15 |
| value error | ±0.2 | | ±0.2 |
Meet the latest national standards:
◆GB7258-2012 " Motor Vehicle safety technical conditions"
◆GB21861-2014 "Motor vehicles safety technical inspection items and methods”
◆GA468-2004 "Motor vehicles safety inspection items and methods"
◆JT/T478-2002 " Automobile inspection station computer control system technical regulation”
Scope of application
The department of motor vehicles management, motorcycle factory and testing institution motorcycle repair shop
Test items:
◆External inspection, braking, wheel load, wheel deviation, speed ,emission, headlights, sound level, etc. (manufacturer production quality assurance line)
◆Wheel load, braking, emission, lighting (safety inspection institute)
Test Line feature
◆Detects motorcycles which axle load below 300kg and 2-wheel, 3-wheel and 4-wheel electric vehicles which axle load below 1040 kg.
◆Three vehicles can be launched at the same time detection which made the high efficiency
◆Frequency conversion adjustment, the device quickly reach to the setting data, easily to install and simple calibration
◆Automatic re- check, self-test function, unique structure, good reliability, accurate and reliable measurements
◆High precision sensor and high detection precision as well as repeat-ability
◆Adopting digital communication technology with high reliability, industrial module maintenance is convenient
◆Tester bench adopts the integral welding, high strength, no anchor belt installation, easy to install and debug.
Classification and layout
There are two kinds of motorcycle test line: two wheel motorcycle and whole model. The test line for two wheel motorcycle can only test two wheel motorcycle, the whole vehicle test line can test not only two wheel motorcycle but also tricycle, and partial tricycles.
